23.5m³/min 40Bar Heatless Adsorption High Pressure Desiccant Air Dryer Regeneration

This is heatless adsorption dryer. Of course, we also produce many other compressed air dryers. For example, our factory also manufacture high pressure refrigerated air dryer. The inlet air pressure of this dryer is 40 Bar. In addition, we can customize the regenerative air dryer up to 100 Bar.

High pressure desiccant air dryer is suitable for special compressed air system. For instance, we usually use it for PET bottle blow molding. Additionally, use it for leakage test and laser cutting.

Technical sheet of high pressure desiccant air dryer:

Why choose our heatless adsorption dryer?

(1) Firstly, our high pressure desiccant air dryer has strict quality control. Besides, it pass strict pressure test. So make sure it applicable to high pressure systems.

(2) Secondly, we use top brand adsorbents. It produces less dust and has a long service life. Moreover, the filling volume is enough. The filling volume per cubic meter is about 20~23KG/air flow. So it can guarantee the dew point of heatless adsorption dryer.

(3) Thirdly, various dew points are available. Besides -40℃ dew point, we can also customize -20℃ and -70℃. So it can meet the different requirements.

(4) Pneumatic butterfly valve adopts German brand. The lifetime is long. And the performance is more stable. In addition, the valves and fittings can withstand high pressure. So our desiccant dryer regeneration run stably and reliably. Eliminate abnormal noise and leakage.

(5) Heatless adsorption dryer use stainless steel diffuser. It can make the compressed air and adsorbent contact evenly.

(6) Finally, the high pressure desiccant air dryer uses unique muffler design. Double-layer small hole muffler. So it will reduce the noise generated by high pressure exhaust.

How does heatless adsorption dryer work?

Desiccant dryer regeneration achieves drying through “pressure changes”. That is, the principle of pressure swing adsorption. The ability of air to hold water vapor is inversely proportional to pressure. De-pressurize a portion of the dried air to atmospheric pressure. This pressure change makes the air drier. Then let it flow through the desiccant beads layer. That is, the drying tower that has absorbed enough water vapor. Finally, the dry regeneration air gets out the moisture in the desiccant. And take it out of high pressure desiccant air dryer. So as to achieve the purpose of dehumidification.

Heatless adsorption dryer uses the unique micropores of the desiccant material itself. Absorbs moisture in compressed air. At the same time, desorp moisture through the PSA principle. The air dryer is a twin towers structure. Under the control of the program controller, the two towers work alternately. One absorbs moisture. The other one is desorbed and regenerated. And they work continuously and sequentially.

FAQ

Q1: What’s the regeneration air volume of heatless adsorption dryer?

A1: The average air consumption of heatless desiccant dryer regeneration is 13%.

Q2: What’s the max pressure of your high pressure desiccant air dryer?

A2: The working principle of this regenerative air dryer is 40bar. Of course, we can customize it up to 100bar.

Q3: What’ the working period of the heatless adsorption air dryer?

A3: The work cycle time of the heatless air dyer is about 10 minutes.

Q4: Can your high pressure desiccant air dryer achieve the remote control?

A4: Sure. This desiccant dryer regeneration is with PLC. So we can control it remotely.

Q5: What’s the adsorbent lifetime of your heatless adsorption dryer?

A4: The lifetime of our desiccant beads is at least two years. Of course, the lifespan depends on the specific work situation.